Simple and fast
sensing and reading of the oil temperature and its remaining service life.
Reliable
warning messages issued if the predefined limit values, such as max. oil temperature, are exceeded.
Individually planned
maintenance intervals allow optimum utilization of oil service life and reduce maintenance costs.
The DUO (Diagnostic Unit Oil aging) diagnostic unit carries out a thermal analysis on your gear unit oil. A thermal sensor measures the oil temperature and sends this information to an evaluation unit, which then calculates the time remaining service life for the specified oil type.
All you need to do is define the limit values so that DUO can send you a warning message when they are exceeded. In practice, this means that you can keep an eye on the remaining oil service life – and thus the performance – of your mechanical drive technology at all times.
Technical data | Value | |
Types of oil |
| |
| ||
| ||
| ||
Permitted oil temperature | -40...+130°C | |
Permitted temperature sensors | PT100 or PT1000 | |
EMC | EN61000-4-2 ESD: 4 kV CD/8 kV AD EN61000-4-3 HF blasted: 10 V/m EN61000-4-4 burst: 2 kV EN61000-4-6 HF cable-conducted: 10 V | |
Ambient temperature | -20...+70°C | |
Operating voltage | DC 18 ... 28 V1) | |
Current consumption at DC 24 V | < 90 mA (when display is active) | |
Protection class | III | |
Degree of protection | IP67 (optionally IP69K) | |
Housing materials | Diagnostic unit | V2A; EPDM/X (Santoprene); PBT (Pocan); FPM (Viton) |
Temperature sensor | V4A | |
Electrical connection | Diagnostic unit | M12 plug connector |
Temperature sensor |
|
For installation on small sizes or industrial gear units, please contact SEW‑EURODRIVE.